September 10 at 08:50 AM
If you have enabled the remote feature of your machine, go to https://monitor.adopisoft.com > Machines > Select your machine and click "Manage" button. Then click "Remote Portal" to access your machines web admin.
If you have not enabled the remote feature, you can still access your machine if you know the WAN IP address of your machine. To do so, install a network scanner software in your PC to search for the IP of your machine. Once you found the WAN IP of your machine, type the IP in your browser to access the admin interface of your machine.
Once you have access to your machine's web admin interface, go to "Device" tab of your machine ang click "Check for updates" button. Select your preferred software version to install.
September 09 at 05:03 PM
This update is deprecated due to network detection bug
Fix USB LAN not working for new software image. If you have not installed the latest image (v3.0.84). You don't have to update.
September 07 at 05:41 PM
Using Ngrok as remote management service. Please signup to https://ngrok.com and get your ngrok Auth Token. Then login to your machine's web admin interface and go to SERVICES TAB. Enable remote feature and input your ngrok auth token. Lastly, reboot your machine.
Online monitoring will only be compatible with the the latest version.
You can also download the new RPI software image compatible with RPI version 4 from our website at https://www.adopisoft.com/downloads
December 07 at 08:33 PM
December 06 at 12:06 PM
December 05 at 08:39 PM
December 03 at 03:16 AM
Can boot and login to admin even if not connected to internet
Can select any software version to install from version 3.0.67 to latest in Admin > Device > Software Updates
Start up/Shutdown/Reboot system logs
Move announcements to separate page
Users file error logs (for troubleshooting purposes)
Fix wan interface static ip not working on
software image version 3.0.77 and up
PS: Backup data before doing software update.
November 30 at 04:54 AM
Fix unable to save traffic shaping description
Can select any gpio pin for coinslot (NOTE: GPIO numbering is based on RPI BOARD)
Can select any gpio pin for relay (NOTE: GPIO numbering is based on BROADCOM Chip)
Can select arduino as coinslot sensor if gpio pins are broken/not working properly. Instructions on adruino setup can be found at:
This arduino coinslot sensor will also be used for PC version of AdoPiSoft.
For those who are having problems with coinslot, not credited time and other problems with detecting coins, try this new method using arduino.
PS: Always backup data before doing update and be ready to reflash software image if update is not successful.
November 12 at 09:43 PM
IMPORTANT: Always backup your data before doing software update in Admin > Security > Backup & Restore data
Fixed bandwidth limiter bugs
Moved hide button(s) options from Timer Settings to Portal Settings
Allow user to transfer remaining time regardless if cookie authentication is disabled or not
Hide view token button if cookie authentication is disabled and if user's remaining time is not transferable
Display user device as "disconnected" when it is unreachable/no ip address
November 08 at 09:01 PM
Support booting from USB (need to flash latest image)
Can set "allow pause time" individually per user
Bug fixes for cookie authentication feature
Transfer remaining time doesn't rename/interchange the hostname anymore
Record customer mac when using buy voucher button
Record admin username when generating vouchers in dashboard
Automatically add to sales inventory when voucher is generated from portal by customer
Increased IP lease time to minimum of 2 days and maximum of 3 days. Before it was only 12 hours
When "auto continue users time after reboot" is enabled, users no longer need to go to portal when they reconnect
Cookie Authentication Settings and Backup/Restore data has been moved to Security section
November 06 at 08:19 AM
November 05 at 11:53 PM
Cookie based authentication option - remedy for mac cloning issue.
Option to allow user to transfer remaining time to another device using token.
"Allow user to pause time" option is changed from Days to Hours
Ability to rollback software to previous version
Improved admin dashboard response and performance
Read more about cookie authentication:
October 22 at 05:11 AM
October 11 at 12:03 AM
October 10 at 03:15 PM
(Still in Beta)
- Spanish language support
October 10 at 09:03 AM
To do so, go to web admin > Bandwidth > Traffic shaping
Port priority bandwidth = n% of global bandwidth
The remaining bandwidth will be divided per user for regular traffic
like web browsing(http).
Make sure global bandwidht (up and down) is equal to your (average) ISP given speed.
October 09 at 04:01 AM
To disable auto-reload of wifi users, go to
web admin > Timer Settings > Turn off auto-reload after reboot/shutdown
To change language, go to
web admin > Portal > Web Portal > Language
September 25 at 01:36 AM
September 21 at 02:53 PM
✅ Auto-reconnect and show wifi users after restart/power off
✅ Fix timer not running even if pause time is not
allowed as reported by some users.
NOTE: This is not a mandatory software update.
For those who have problems with pause time and pause time validity,
update your machine and observe if this will fix your problem.
Please email your feedback to [email protected]
September 05 at 01:24 PM
September 05 at 04:08 AM
August 23 at 01:56 AM
Fix going back to trial version issue
Fix machine is offline
We now use another server to check if machine is online.
Current server is currently experiencing DDOS attacks.
The website will be back and running in 24 hours.
August 16 at 10:56 AM
Remote access feature is currently buggy and causes version rollback issue on some machines and becomes trial version.
The source of the error was determined using the system logs posted by some users.
To disable the remote access feature, go to Admin > Services > Remote Access
August 15 at 05:41 AM
(Possibly) fix version rollback issue
August 13 at 06:15 AM
Remotely reset/shutdown/restart device
(Possibly) fix frequent "machine is offline" error
Syste Logs - to see erros in the system and to determine the cause of bugs
Machine is now identified by RPI and SD Card serial.
This is to address the problem regarding SD cards with the same serial number.
Now, you will no longer worry if your sd card is a clone.
August 03 at 08:06 AM
Remote software update
August 01 at 10:24 PM
Online Remote Management Launched!
Update your software to latest version 3.0.60
For those who did not buy from the website,
send an email to the seller of your license with subject: Need Help: Online Account
The body of the email must contain at least one of your license keys
so I can lookup your account and send to you your login deails.
If some of your license keys is not found in the dashboard,
send an email to [email protected] with subject: Missing License Keys
The body of the email must cocntain list of missing license keys.
This is because you may have multiple accounts in the system and
some of your license keys may belong to one your other accounts.
Lastly, explore the dashboard. It has limited functionality as of the moment,
but expect additional features in the coming weeks.
July 22 at 06:53 PM
Auto-reconnect WAN interface if UTP cable is unplugged/replugged
WARNING: This might change the remaining time of
users due to timezone changes.
So always backup your data before updating.
NOTE: If you encounter MACHINE IS OFFLINE
and/or your license key is not working.
Make sure to UPDATE THE SOFTWARE TO LATEST VERSION.
July 17 at 07:21 PM
Hide tabs, forms and buttons with restricted permissions
Can hide license key base on permission
IP pool is now 10.0.0.11 - 10.0.15.254
10.0.0.2 to 10.0.0.10 is free for APs static IPs
(Possibly) fix incorrect time given
Default DNS is Norton
Remove USB WiFi option
Change user's device hostname
Auto delete used vouchers option
Sort wifi users by remaining time, status, ip, downlad/upload speed
Additional permissions need to be enabled to view vouchers and sales inventory.
Go to Accounts > My Profile to enable permissions.
July 13 at 06:56 AM
- Fix unable to hide buy voucher button in View Rates popup
July 11 at 02:10 PM
Remove custom CSS button
July 11 at 08:56 AM
Can upload custom portal CSS
July 11 at 02:35 AM
July 11 at 01:10 AM
July 09 at 08:51 PM
July 09 at 05:46 AM
July 07 at 03:46 AM
July 06 at 08:38 PM
July 04 at 10:02 PM
Go to Accounts > Profile and enable Backup/Restore permission.
Go to Device > Backup & Restore section to perform backup/restoration.
Important: Make sure to allow browser popup.
July 04 at 04:35 PM
July 03 at 01:12 PM
Fix for unable to connect on some phones
July 02 at 06:50 PM
Support for old android phones
Tested working on android 2.3.3 stock browser tablet emulator.
Needs further testing.
Pls post your feedback to our community.
July 01 at 07:22 PM
Global bandwidth limiter
June 27 at 03:33 PM
June 26 at 03:40 PM
June 25 at 03:12 PM
June 23 at 03:30 PM
Coinslots that have pulses not equal to amount will no longer work.
Pulses and amount must match.
An alternative to global limit is to limit the number of users in wifi settings.
June 20 at 07:40 AM
June 19 at 11:06 AM
If you find any issues, pls report to our community at:
June 18 at 10:15 AM
Fix splash screen black background
June 18 at 09:28 AM
NOTE: The new portal still needs to be tested with old and low-end phones.
Pls post your feedback to our community
June 14 at 06:37 PM
Using own server to check online status
June 07 at 10:27 AM
Improve checking if machine is online
June 02 at 09:32 PM
- active low option for coinslot relay
- limit number of wifi users on external access point
- download text file for voucher code dispensers
- fix issue when 2 users press insert coin at the same time
June 01 at 08:03 AM
Disable reset pins by default. Damn this bug xD
June 01 at 05:11 AM
deley detection of reset pins
May 31 at 04:38 PM
There are reports that the system configuration suddenly resets itself.
My suspicion is that some RPI gpio pins 39 & 40 (used for configuration reset) are too sensitive.
Now, you will have to short/hold together pins 39 & 40 for 5 seconds in order to reset the configuration. Hope this will fix the problem.
May 29 at 01:13 PM
May 28 at 07:00 AM
Can change admin logo
IMPORTANT: Before you change the logo, make sure to enable your "Change logo" permission first in your account. Go to Admin > Accounts > My profile.
May 27 at 07:08 PM
When using a RELAY to turn the coinslot on/off:
Some coin slots releases false coin insertion signal when it turns on.
Thus, it gives the user credits by just pressing the insert coin button because the relay turns on the coinslot.
This is only my assumption of the problem because I have experienced it before
that some coinslots release a signal when they are turning on.
We delayed the detection of coin by 2 seconds to avoid the false signal from coinslot when it is turning on.
After this software update, you will observe that upon pressing the insert coin,
it will become a bit slower because of the 2 seconds delay.
This fix still needs to be tested. Thanks to Sir Alex for reporting the issue.
May 25 at 10:37 PM
Make "here's your voucher" popup screen responsive
May 25 at 10:59 AM
Minor hotfix for checking internet connectivity
May 25 at 07:39 AM
Auto generate vouchers. Users can select to print voucher instead of adding time to their device.
May 22 at 12:24 AM
May 21 at 06:53 AM
IF YOU FIND ANY BUGS. PLS REPORT IMMEDIATELY
May 20 at 05:33 AM
May 20 at 02:59 AM
May 18 at 08:11 PM
May 17 at 10:19 PM
May 16 at 01:35 PM
May 15 at 11:29 PM
May 14 at 10:31 PM
New admin design and layout. In preparation for more admin settings and options.
May 10 at 01:20 PM
May 09 at 08:07 PM
May 05 at 11:43 AM
May 03 at 05:05 AM
May 03 at 03:20 AM
April 21 at 03:27 AM
Warning: This will delete current saved time of customers and vouchers list.
March 29 at 08:49 AM
March 28 at 11:31 PM
March 24 at 04:18 PM
Fixed: Deduct time even if customer is disconnected, when allow pause is disabled.
March 23 at 05:58 PM
March 18 at 08:03 AM
March 18 at 08:03 AM
March 18 at 08:03 AM
March 18 at 08:03 AM
March 18 at 08:03 AM
March 17 at 11:27 PM
March 17 at 01:11 PM
March 17 at 01:11 PM
February 26 at 12:19 AM
February 22 at 01:12 PM
February 21 at 09:58 PM
February 20 at 06:49 AM
February 18 at 09:26 AM
February 17 at 03:28 PM
February 17 at 03:08 PM
© Copyright AdoPiSoft. All Rights Reserved